Açıklama
Notes
Note |
|
Technical Data
Configuration
Configuration options | DIP switch WAGO Arayüz Konfigürasyon Yazılımı WAGO Arayüz Yapılandırma Uygulaması WAGO Yapılandırma Ekranı |
Input
Input signal type | Akım Current |
Input signal, current | AC 0,5 … 100 A DC ±100 A |
Frequency range | 15 … 1000 Hz |
Maks. giriş sinyali | 100 A AC/DC |
Yanıt eşiği | 500 mA (AC); 250 mA (DC) |
Resolution (current) | 10 mA 10 mA |
Output
Output signal type | Akım Gerilim Current Voltage |
Output signal voltage | ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V; 2 … 10 V |
Output signal current | ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA |
Load impedance (output/voltage) | ≥ 1 kΩ |
Load impedance (output/current) | ≤ 600 Ω |
Çıkış – Dijital:
Max. switching voltage (DO) | Uygulanan besleme gerilimi : −0.3 V |
Max. continuous current (DO) | 100 mA (dahili kısıtlama yok) |
Number of switching tresholds (DO) | 1 veya 2 (ayarlanabilir) |
Configurable rise/fall delay time (DO) | 0 … 60 s (yazılım aracılığıyla) |
Çıkış – Röle:
Dielektrik dayanımı, açık kontak (AC, 1 dak) | 1 kV eff |
Number of changeover/switchover contacts | 1 |
Contact material (relay) | AgNi + Au |
Max. switching voltage | AC 250 V |
Dielectric strength open contact (AC, 1 min) | 1 kVrms |
Çekme süresi (tip.) | 8 ms |
Bırakma süresi | 4 ms |
Sıçrama süresi (tip.) | 8 ms |
Number of switching tresholds (relay) | 1 veya 2 (ayarlanabilir) |
Configurable rise/fall delay time (relay) | 0 … 60 s (yazılım aracılığıyla) |
Signal processing
Ölçme prosedürü | Gerçek RMS ölçümü; Aritmetik ortalama değer |
Max. operating frequency | 3,3 kHz |
Filtre (T 10-90 ) | Hareketli ortalama değer (filtre seviyesi: 30) |
Step response typ. | 60 ms (DC; yazılım filtresi 3/varsayılan ayar için); 250 ms (AC) |
Measurement error
İletim hatası (tam skala) | ≤ %1 (tam ölçek değerinin) |
Sıcaklık katsayısı | ≤ %0,01 /K |
Power supply
Type of power supply | 24 VDC |
Nominal supply voltage U S | DC 24 V |
Supply voltage range | ±30 % |
Current consumption at supply voltage | ≤ 50 mA (+ I DO) |
Safety and protection
Anma gerilimi | 300 V |
Rated voltage | AC 300 V |
Measurement category per EN/UL 61010-2-030 | CAT II (input) |
Note on insulation parameters | The conductor carrying the measurement current must have at least basic insulation for the voltage used. The test voltage of the conductor carrying the measurement current must be at least 1390 V rms AC or 1390 VDC. Dijital çıkış (DO) kaynağın potansiyelindedir. |
Koruma sınıfı | IP20 |
Test voltage
Test voltage | AC 3 kV; 50 Hz; 1 min |
Test voltage (measurement circuit/relay output/supply/analog output) | 3 kVAC; 50 … 60 Hz; 1 min |
Test voltage (measurement circuit/relay output/supply/service interface) | 3 kVAC; 50 … 60 Hz; 1 min |
Test voltage (analog output/service interface) | 2 kVAC; 50 … 60 Hz; 1 min |
Insulation coordination (UL)
Overvoltage category | II |
Pollution degree | 2 |
Insulation type (measurement circuit/relay output, supply, analog output and service interface) | Double insulation (safe isolation) |
Insulation type (analog output/service interface) | Basic insulation |
Insulation type (relay output/supply/analog output and service interface) | Reinforced insulation (safe isolation) |
Bağlantı verisi
Bağlantı teknolojisi | İtmeli CAGE CLAMP ® |
WAGO terminal | picoMAX® 5.0 |
Tek damarlı boylar | 0,2 … 2,5 mm² / 24 … 12 AWG |
İnce bükümlü kablolar | 0,2 … 2,5 mm² / 24 … 12 AWG |
Sıyırma uzunluğu | 9 … 10 mm / 0.35 … 0.39 inches |
Ölçüm iletkeni için geçiş | Ø 9,5 mm |
Geometrical Data
Width | 22,5 mm / 0.886 inches |
Height | 105 mm / 4.134 inches |
Depth | 107 mm / 4.213 inches |
Mekanik Veri
Montaj | DIN-35 ray DIN 35 ray |
Material Data
Yangın yükü | 1,791 MJ |
Ağırlık | 102,9 g |
Environmental Requirements
Surrounding air (operating) temperature | -40 … +70 °C |
Surrounding air (storage) temperature | -40 … +85 °C |
Temperature range of connection cable | ≥ (T çevreleyen hava + 10 K) |
Temperature range of connection cable (UL) | 80 °C |
Standartlar ve Spesifikasyonlar
Uygunluk işareti | CE |
EMC immunity to interference | EN 61000-6-2; EN 61326-2-3; EN 50121-3-2 |
EMU: | EN 61000-6-4; EN 61326-2-3; EN 50121-3-2 |
Standartlar/spesifikasyonlar | EN 50121-3-2 EN 61010-1 EN 61373 |