281-612/281-418

281-612/281-418

2 iletkenli sigortalı klemens; döner sigorta yuvalı; Neon lambalı atmış sigorta göstergeli; 120 V; DIN-ray 35 x 15 ve 35 x 7,5 için; 4 mm²; CAGE CLAMP®; 4,00 mm²; gri

Ürün Kodu : 281-612/281-418 Kategori : , Marka:
Liste Fiyatı:

Resmi Distribütör

Size özel avantajlı fiyatlarımız ve kampanyalı fiyatlarımız için bizimle iletişime geçin...

Açıklama

Elektrik Verisi
Ratings per IEC/EN
1'e göre derecelendirme
IEC/EN 60947-7-3
Overvoltage category
III
III
II
Pollution degree
3
2
2
Anma gerilimi
800 V
-
-
Şok gerilimi
8 kV
-
-
Nominal akım
10 A
-
-
Power loss
Note on max. power loss P v max When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.
Power loss P l max. overload and short-circuit protection (individual arrangement) 2,5 W
Power loss P l max. overload and short-circuit protection (group arrangement) 1,6 W
Power loss P l max. short-circuit protection (individual arrangement) 4 W
Power loss P l max. short-circuit protection (group arrangement) 4 W
General
Fuse mounting pivoting
Fuse type Cylindrical fuse; 5 x 25 mm
Bağlantı verisi
Toplam bağlantı noktası sayısı 2
Toplam potansiyel sayısı 2
Seviye sayısı 1
Connection 1
Bağlantı teknolojisi CAGE CLAMP®
Actuation type El aleti
Connectable conductor materials Bakır
Alüminyum
Connectable conductor materials Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste 249-130 is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm² = 16 A
4 mm² = 22 A
Tek damarlı boylar 0,08 … 4 mm² / 28 … 12 AWG
İnce bükümlü kablolar 0,08 … 4 mm² / 28 … 12 AWG
Sıyırma uzunluğu 9 … 10 mm / 0.35 … 0.39 inches
Kablolama tipi Önden girişli kablolama
Geometrical Data
Width 8 mm / 0.315 inches
Height 60 mm / 2.362 inches
Length from upper-edge of DIN-35 rail 60 mm / 2.362 inches
Mekanik Veri
Tasarım köşeli
Montaj tipi DIN-35 ray
Etiketleme seviyesi Ortaya etiketleme
Material Data
Note (material data)
Information on material specifications can be found here
Renk gray
Malzeme grubu I
İzolasyon malzemesi Poliamid 66 (PA 66)
UL 94'e göre tutuşabilirlik değeri V0
Yangın yükü 0,324 MJ
Ağırlık 17,5 g
Environmental Requirements
İşlem sıcaklığı -35 … +85 °C
Continuous operating temperature -60 … +105 °C
Ticari Veri
Product Group 1 (Rail Mounted Terminal Blocks)
eCl@ss 10.0 27-14-11-16
eCl@ss 10.0 27-14-11-16
ETIM 8.0 EC000899
ETIM 8.0 EC000899
Pack. unit 50 Adet
SAP'den ambalaj tipi box
SAP tesis 01'den menşei DE
GTIN 4045454197018
SAP tesis 01'den gümrük tarifesi no. 85369095000
Environmental Product Compliance
RoHS Compliance Status Compliant,No Exemption