2857-535/000-001

2857-535/000-001

Sıcaklık sinyali şartlandırıcı; Yazılım üzerinden konfigürasyon; Besleme gerilimi: 24 VDC

Liste Fiyatı:

Resmi Distribütör

Size özel avantajlı fiyatlarımız ve kampanyalı fiyatlarımız için bizimle iletişime geçin...

Açıklama

Notes
Note This product is supplied with 24 VDC, which can be commoned using lateral push-in type jumper bars: (6.1) U S + (BR) and (6.2) GND 2 (BR). With this variant, it is necessary to ensure that the maximum permissible total current of 1 A is not exceeded.
Technical Data
Configuration
Configuration options WAGO Arayüz Konfigürasyon Yazılımı
WAGO Yapılandırma Ekranı
WAGO Arayüz Yapılandırma Uygulaması
Döner enkoder anahtarı
Input
Input signal type RTD sensörleri
Potansiyometreler
Direnç
TC sensörleri
Input – RTD sensors
Sensor types (RTD) Pt10 … Pt2000 Genişletilebilir
Max. sensor supply current (RTD) ≤ 0,5 mA
Measurement range temperature (RTD) -200 … 850°C
Min. measuring span (RTD) 50 K
Input (TC sensors)
Sensor types (TC) Tip J
Tip K
Tip E
Tip R
Tip N
Tip S
Tip T
Tip B
Tip C
Measurement range temperature (TC) -210 … 1200 °C (Tip J); -200 … 1372 °C (Tip K); -200 … 1000 °C (Tip E); 250 … 1768 °C (Tip R); -200 … 1300 °C (Tip N); -50 … 1664 °C (Tip S); -200 … 400 °C (Tip T); 250 … 1820 °C (Tip B); 0 … 2320 °C (Tip C)
Min. measuring span (TC) 100 K
Soğuk bağlantı(cold junction) kompanzasyonu AÇIK/KAPALI (Varsayılan: AÇIK)
Cold Junction hatası 3 K (tip. 2 K )
Input (resistors)
Input range resistance 0 … 10 kΩ
Input range potentiometer 0 … 10 kΩ
Min. measuring span 50 Ω
Output Modbus
Adresleme 64
Addressing Via rotary encoder switch: 1 … 99
Via service interface: 1 … 247 (rotary encoder switch set to “0”)
Parite Even; others can be configured
Konnektör 6 x picoMAX ® for daisy chain configuration
Maks. veriyolu hattı uzunluğu 1000 m
Sonlandırma direnci Can be activated; 150 Ω; 120 Ω + 1 nF
Parameter Read input registers (0x04):
  • Measured value: address (0x0000); data type (float); access (read)
  • Relay status: address (0x0002); data type (word); access (read)
Çıkış – Röle:
Dielektrik dayanımı, açık kontak (AC, 1 dak) 1 kV eff
Number of changeover/switchover contacts 1
Max. switching voltage AC 250 V
Dielectric strength open contact (AC, 1 min) 1 kVrms
Number of switching tresholds (relay) 1 veya 2 (ayarlanabilir)
Configurable rise/fall delay time (relay) 0 … 60 s (yazılım aracılığıyla)
Communication
İletişim Modbus® RTU
Interface RS-485 (2-telli)
Adresleme 64
Max. length of bus line ≤ 1000 m
Baud rate 9,6 kBd … 19,2 kBd
Sonlandırma direnci Can be activated; 150 Ω; 120 Ω + 1 nF
Addressing Via rotary encoder switch: 1 … 99
Via service interface: 1 … 247 (rotary encoder switch set to “0”)
Signal processing
Filtre (T 10-90 ) Hareketli ortalama değer (filtre seviyesi: 30)
Step response typ. 130 ms (2 telli); 700 ms (3 telli); 700 ms (4 telli); 600 ms (Diferansiyel); 500 ms (Potansiyometre); 150 ms (Soğuk bağlantı kompanzasyonu (OFF)); 400 ms (Soğuk bağlantı (ON) kompanzasyonu)
Measurement error
İletim hatası tam ölçüm aralığında ≤ %0,1
Ayarlı ölçüm aralığı iletim hatası ≤ (100 K/set ölçüm aralığı [K]) %
Sıcaklık katsayısı ≤ %0,01 /K
Power supply
Type of power supply 24 VDC
Nominal supply voltage U S DC 24 V
Supply voltage range -60 … +30 %
Current consumption at supply voltage ≤ 50 mA
Safety and protection
Anma gerilimi 300 V
Rated voltage AC 300 V
Measurement category per EN/UL 61010-2-030 CAT II (input)
Note on insulation parameters The service interface is located on the service interface potential.
The DIN-rail contact (functional ground) is capacitively coupled to the communication interface.
Koruma sınıfı IP20
Test voltage
Test voltage AC 3 kV; 50 Hz; 1 min
Test voltage (input/communication interface/relay output/supply) 3 kVAC; 50 … 60 Hz; 1 min
Test voltage (input/DIN-rail contact/relay output/supply) 3 kVAC; 50 … 60 Hz; 1 min
Insulation coordination (UL)
Overvoltage category II
Pollution degree 2
Insulation type (input/DIN-rail contact/relay output/supply) Reinforced insulation (safe isolation)
Insulation type (input/communication interface/relay output/supply) Reinforced insulation (safe isolation)
Bağlantı verisi
Bağlantı teknolojisi İtmeli CAGE CLAMP ®
WAGO terminal picoMAX® 5.0
Tek damarlı boylar 0,2 … 2,5 mm² / 24 … 12 AWG
İnce bükümlü kablolar 0,2 … 2,5 mm² / 24 … 12 AWG
Sıyırma uzunluğu 9 … 10 mm / 0.35 … 0.39 inches
Konnektör 6 x picoMAX ® for daisy chain configuration
Geometrical Data
Width 22,5 mm / 0.886 inches
Height 110 mm / 4.331 inches
Depth 107 mm / 4.213 inches
Mekanik Veri
Montaj DIN-35 ray
Material Data
Yangın yükü 2,168 MJ
Ağırlık 13 g
Environmental Requirements
Kirlilik derecesi 2
Surrounding air (operating) temperature -40 … +70 °C
Surrounding air (storage) temperature -40 … +85 °C
Temperature range of connection cable ≥ (T çevreleyen hava + 10 K)
Temperature range of connection cable (UL) 85 °C
Relative humidity 5 … 95 % (yoğuşmasız)