773-102

773-102

Buatlar için PUSH WIRE® konnektör; tek damarlı, bükümlü iletkenler için; maks. 2,5 mm²; 2 iletkenli; saydam gövde; sarı kapak; maks. ortam çalışma sıcaklığı 60 °C; 2,50 mm²; çok renkli

Ürün Kodu : 773-102 Kategori : , Marka:
Liste Fiyatı:

Resmi Distribütör

Size özel avantajlı fiyatlarımız ve kampanyalı fiyatlarımız için bizimle iletişime geçin...

Açıklama

Notes
Güvenlik bilgisi topraklanmış elektrik hatlarında
Elektrik Verisi
Ratings per IEC/EN
1'e göre derecelendirme
IEC/EN 60664-1
Overvoltage category
III
III
II
Pollution degree
3
2
2
Anma gerilimi
-
-
400 V
Şok gerilimi
-
-
4 kV
Nominal akım
-
-
24 A
Bağlantı verisi
Toplam bağlantı noktası sayısı 2
Toplam potansiyel sayısı 1
Connection 1
Bağlantı teknolojisi PUSH WIRE®
Actuation type Bastırmalı
Connectable conductor materials Bakır
Alüminyum
Connectable conductor materials Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste 249-130 is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm² = 16 A
4 mm² = 22 A
Tek damarlı boylar 0,75 … 2,5 mm² / 18 … 12 AWG
bükümlü, bağlanabilir 1,5 … 2,5 mm² / 16 … 12 AWG
Not (iletken kesiti) When using conductors of the same diameter, 0.75 mm²/18 AWG cross-section is also possible.
Sıyırma uzunluğu 12 mm / 0.47 inches
Kablolama tipi Yandan girişli kablolama
Geometrical Data
Width 9,2 mm / 0.362 inches
Height 13,1 mm / 0.516 inches
Depth 19,5 mm / 0.768 inches
Material Data
Note (material data)
Information on material specifications can be found here
Renk çok renkli
Renk yellow
UL 94'e göre tutuşabilirlik değeri V2
Yangın yükü 0,037 MJ
Ağırlık 1,6 g
Environmental Requirements
Surrounding air (operating) temperature +60 °C
Continuous operating temperature 105 °C
Ticari Veri
Product Group 7 (Push Wire Conn.)
eCl@ss 10.0 27-14-11-04
eCl@ss 10.0 27-14-11-04
ETIM 8.0 EC000446
ETIM 8.0 EC000446
Pack. unit 1000 (100) Adet
SAP'den ambalaj tipi box
SAP tesis 01'den menşei CN
GTIN 4044918397537
SAP tesis 01'den gümrük tarifesi no. 85369010000
Environmental Product Compliance
RoHS Compliance Status Compliant,No Exemption